Filter By:
Parts & Accessories

$99.95
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans.
Features
- Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT
- Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

$29.95
An adapter to enable safe transport of bikes with carbon frames.
Features
- The fixation pressure is distributed over a large surface area to minimize risk of frame damages
- It fits all types of frame geometries and is easily adjustable with no loose parts
- The adapter has a soft TPE rubber liner to avoid scratching the bike frame
- Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

$69.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

$69.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$89.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 6 locks, all using the same key

$49.95
Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

$59.99
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs
An all-in-one design that fits four thru axle spacing standards:
- 15mm x 100mm
- 15mm x 110mm
- 12mm x 100mm
- 20mm x 110mm
- Mounts directly to any flat surface for bike transport or storage
- Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately)
- Mounting hardware not included

$199.99
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Hitch Base fits 2" receivers
- Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 3 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle

$51.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$49.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

$19.99
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack
- Provides a clean and sleek look for your Saris Bones rack
- Upgrade your current Bones or Bones EX rack (pre-2022)
- Compatible with: Bones or Bones EX racks
- Not compatible to use with any Bones Hitch racks or SUPERBones

$29.00
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

$19.99
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver.
- Adds extra security to bike racks and hitch devices
- Eliminates rattling and wobbling
- Compatible with 2" receivers

$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

$199.95
Expand the capacity of your HighNoon FC or HighNoon FC Solo with this Add-On.
- Compatible with 2" HighNoon FC to expand carrying capacity to 3 bikes, or HighNoon FC Solo to expand capacity to 2 bikes.
- Lowers max weight capacity from 60 lbs per bike to 45 lbs per tray
- No contact with frame, secures bicycle by front wheel
- Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29"
- Compatible with bicycle wheelbases from 34" to 52"
- Rack weight 14lbs (shipping weight 20lbs)
- NOT COMPATIBLE with BackStage, MonoRail, SplitRail, GuideRail (Only fits HighNoon FC 2" or Solo)

$29.95
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes.
- Fits Thule EasyFold XT bike racks

$44.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Page 1 of 1