Filter By:
Workstands

$9.90 - $19.99
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp:
- 1002: fits 100-3X and 100-5X extreme range clamps
- 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12
- 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps
- 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps
- 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps
- 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current)
- 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C)
- 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands)
- 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

$409.95
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike.
Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport.
The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit.
- Maximum weight capacity*: 36 kg (80 lbs.)
- Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide
- Jaw width: 70 mm (2.75")
- Height adjustable from 97 to 147 cm (38" to 58")
- Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6")
- Weight: 5.7 kg (12.6 lbs.)
- The PRS-26 uses the 100-25D Micro-Adjust Clamp
- Replaceable jaw covers (part #1960)
*NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

$379.95
Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason.
With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters.
The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
Wheel Capacity:
- Maximum wheel size: Up to 29" + with or without tire
- Maximum hub width: 200 mm (7.87")
- Maximum rim width: 102 mm (4")
- Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors
Mounting Options:
- Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center
- Clamp in vise — base is 76 mm (3") deep
- Install in TSB-2.2 Truing Stand Base

$430.99
Built to withstand the rigors of every day shop use, Park' updated Single Arm Professional Work Stand is the stand of choice for professional mechanics around the world.
• Easily height adjustable from 50" to 62" (128-158cm) utilizing Park's proven Lock Block System
• Includes #105 cast aluminum work tray
• Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
Notes:
• The maximum weight holding capacity of the PRS-3.2 is 68 kg (150 lb.)
• Stand does not include base. Order part #130 base
• To mount directly to floor use part #FP-2 Floor Mounting Plate
Differences from the PRS-3OS:
• Utilizes lock block system which allows easy and fast height adjustment and a more solid connection between the two upright tubes
• Also includes a new height adjustment pin which locks into place for safety and so it won't be lost

$239.99
Park Tool's versatile clamp, the 100-7X fits all PRS-2, 3 and 4 repair stands (including OS models) and works on nearly any bike, no matter the size and shape of the frame tube.
• Durable, screw-type adjustment system provides years of dependable service
• Clamps round, square, rectangular, and aero-shaped tubes from 7/8” to 4” (23mm to 102mm)
• Quick-release pivot system allows clamping of top and bottom or left and right sides of tube
• Adjustable clamping pressure prevents damage to thin-wall tubes
• Narrow jaws for fitting tight access areas
• Replaceable jaw covers (Part #1259) sold separately
Page 1 of 1